Safety Information - Beko CFB 6437 W Manual Del Usuario

EN

- SafEty iNformatioN

- For your safety and correct op-
eration of the appliance, read this
manual carefully before installa-
tion and use. Always keep these
instructions with the appliance
even if you move or sell it. Users
must fully know the operation and
safety features of the appliance.
The wire connection has to
be done by specialized
technician. The manufac-
turer will not be held liable for any
damages resulting from incorrect
or improper installation. The mini-
mum safety distance between the
cooker top and the extractor hood
is 650 mm (some models can be
installed at a lower height, please
refer to the paragraphs on working
dimensions and installation). If the
instructions for installation for the
gas hob specify a greater dis-
tance, this must be respected.
Check that the mains voltage cor-
responds to that indicated on the
rating plate fixed to the inside of
the hood. Means for disconnec-
tion must be incorporated in the
fixed wiring in accordance with the
wiring rules. For Class I applianc-
es, check that the domestic power
supply guarantees
earthing. Connect the extractor to
the exhaust flue through a pipe of
minimum diameter 120 mm.
The route of the flue must be as
short as possible. Regulations
concerning the discharge of air
have to be fulfilled. Do not con-
nect the extractor hood to ex-
haust ducts carrying combustion
fumes (boilers, fireplaces, etc.). If
the extractor is used in conjunc-
tion with non-electrical applianc-
es (e.g. gas burning appliances),
a sufficient degree of aeration
must be guaranteed in the room
in order to prevent the backflow
of exhaust gas. When the cooker
hood is used in conjunction with
appliances supplied with energy
other than electric, the negative
pressure in the room must not ex-
ceed 0,04 mbar to prevent fumes
being drawn back into the room
by the cooker hood. The air must
not be discharged into a flue that
is used for exhausting fumes from
appliances burning gas or other
fuels. If the supply cord is dam-
aged, it must be replaced from the
manufacturer or its service agent.
Connect the plug to a socket com-
plying with current regulations, lo-
cated in an accessible place. With
regards to the technical and safety
measures to be adopted for fume
adequate discharging it is important to close-
ly follow the regulations provided
by the local authorities.
3