Operating The Sensor; Care And Cleaning - Glacier bay 67536-1001 Guía De Instalación Y Cuidado

Operation (continued)
2

Operating the sensor

NOTE: The sensor is active only when the handle is in the
ON position.
□
Turn the handle (1) to the full on position, activating
the sensor (2) and turning the water on.
□
To turn the water off, move your hand within the
sensor range (8in. MAX) as shown.
□
To turn the water on, move your hand within the
sensor range again (8in. MAX range) as shown.
□
Leave the handle (1) in the ON position, and you
can start and stop the ow of water simply with
a wave of your hand.
NOTE: As a water saving feature, the water will turn off
automatically after 3 minutes of continuous ow.
3
Removing the quick connector
□
If it is necessary to remove the quick connector
(1), squeeze the tabs (2) on the quick connector
and then pull down to disconnect.

Care and Cleaning

□
To clean, wipe down with a damp cloth and towel dry.
□
Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will
be voided.
0
3
min.
45
30
Squeeze
1
13
Please contact 1-855-HD-GLACIER for further assistance.
15
1
2
2
Pull
down
1
HOMEDEPOT.COM