Garden Treasures MZ14118CA Manual De Instrucciones página 5

ASSEMBLY INSTRUCTIONS
4. Place top spacer (D) on top of center bowl (E) over pipe (G).
Insert top ring (C) onto top spacer (D), then add nozzle (B)
and secure with top cap (A).
Assembly is now complete.
5. Pour water gently into the bottom bowl (H). Fill the bottom bowl (H)
with 3-1/2 in. of clean water. Completely fill the center bowl with
clean water. Pour 2 cups of water down the top cap (A) to prime.
Plug the pump into a power supply. To adjust the strength of the
water flow, use the small lever on the pump. Moving the level
toward the "+" will increase the strength and moving it toward the "-"
will decrease the strength.
WARNING: Always disconnect the pump before placing your
hands in the water.
OPERATING INSTRUCTIONS
To adjust the water flow, turn nozzle (B) either to the right to decrease
the flow or to the left to increase it.
Please always check the water level in the bottom bowl. Make certain
the water level is not lower than the water fill line in order to achieve
maximum performance.
The pump won't be able to pump the water up without enough water in
the bottom bowl.
4
5
C
D
5
B
Water fill line
A