Terminator
Three Cable Layout Tips
B1.
Locate bus connection (HPT and FP only) and
cable as shown. Cut end of cable at angle to
aid in piercing grommet. Leave additional
cable for expansion loop.
Wiring Details
C1.
Power Connection (1 to 3 Heating Cables)
ZP
TM
B2.
Insert three cables into expediter.
C2.
In-Line Splice and T-Splice
INSTALLATION PROCEDURES
B3.
C3.
5
Mount expediter with three cables. Do not
band over cable.
End Termination (1 to 2 Heating Cables) Re-
move jumpers for 2 cable terminations.
