Amann Girrbach Ceramill MultiCap Modo De Empleo página 11

3. S elect the required indication and material in
the following window and confirm with save.
4. E nter a clear description of the tooth
to be scanned in the MultiCap position
input field (3).
After creating each individual MultiCap
position, insert the die to be scanned in
the MultiCap holder. See Figure 6.
The text of the input field then appears
in the CAD software and is used for
orientation during the design.
5. R epeat the stages (2) – (4) for all other Multi-
Cap positions where dies are to be placed.
6. S tore the entire case in the database with
"Save".
7. T hen start the scanner software.
U S E R M A N U A L
PlaCIng the dIe
In the mUltICaP holdeR
Insert the dies in the MultiCap holder at the
positions defined in the Ceramill Mind database.
aligning the dies:
Align the dies on the MultiCap holder with the
buccal surface facing outwards.
Insertion depth:
Press the dies into the mastic, so that they sit flat
on the surface of the mastic (1):
_ D o not fix in position with mastic above
the recess. (2)
_ D o not allow them to stick out too much. (3)
_ D o not press in too deep. (4)
1
Figure 6: Placing dies in the MultiCap holder
GB
2
3
4
11