Charging The Battery - Hoover ONEPWR DUST CHASER Manual De Usuario

CHARGING THE BATTERY

Ensure that the battery is fully charged prior to use. This may take 3-4 hours to fully charge. The battery will not ship fully charged due to federal regulations.
1
Plug the charger
into a power outlet.
TIPS
During charging, the pack and ambient temperature should be between 41°F to 86°F (5°C and 30°C). The charger will sense if the pack, or ambient temperature, is too cold or too hot, and will
return an error code (red LED will be on) and not charge the pack. Use battery only with charger listed. For use with HOOVER® ONEPWR™ Lithium Ion Batteries.
6
2
Attach the battery pack to the charger by
aligning the ribs on the battery pack to the
grooves in the charger. Slide the battery
pack into the charger.
3
When charging, the lights on the battery
will illuminate to show the state of charge.
If the light on the charger flashes red, there
is an error with the battery or the charger.
Try again or call customer service for
support. Once charge is complete, lights on
the battery will turn off.
4
To remove the battery pack from the
charger, press the latches and pull the
battery away from the charger.