Whittier Wood Products 784W Instrucciones Para Armar página 7

FIG. 8
INSERTING THE GLIDES:
8. Tap the Tack Glides (N) into the Side Panels (AA and BB) near the back. See FIGURE 8. Measure
up 1/4" from the bottom of the unit on the back side of the Base (HH) where it meets the side
panel and draw a short line. Lay the Corner Brace (R) so that its bottom edge is on the line and
screw the corner brace to the side panel and base with #8 x 5/8" Pan Head Screws (W). Screw
Adjustable Glides (Q) into corner braces. See FIGURE 8a.
x12
(772W)
M
x16
(784W)
x12
(772W)
Z
x16
(784W)
FIG. 9
TO INSTALL THE ADJUSTABLE SHELVES:
9. Stand unit upright. Determine the location in which you want to place the Adjustable Shelves
(II). Tap the Shelf Brackets (M) into the four holes with the fl at side down to support each shelf.
Install the shelves as shown in FIGURE 9. You may fasten the shelves by inserting a #6 x 1/2"
Undercut Screw (Z) through the hole in the bottom of the shelf bracket and screwing it into the
adjustable shelf. See FIGURE 9a.
N x2
Q x2
R x2
W
W
1/4"
FIG. 8a
FIG. 9a
W x8
Q
R
772W & 784W – PAGE 7