Uline H-7630 Manual Del Usuario página 7

12" DEEP TOP SHELF ASSEMBLY
1. Line up shelf brackets (5) with uprights at desired height.
2. Secure to uprights with four 1⁄" bolts and flange
nuts. (See Figure 19)
1½"
Shelf Bracket
Bolt
Upright
3. Place shelf (6) on brackets. Install to brackets with
four 5/8" bolts and flange nuts. (See Figure 20)
5/8" Bolts
Flange Nuts
12" DEEP TOP SHELF DIVIDER ASSEMBLY
1. Line up front "C" channel of divider (7) with front
lip of top shelf. Insert divider into front lip at angle.
Once in place, allow divider to drop and magnetize
to back shelf lip. (See Figure 21)
Figure 21
Back
Shelf Lip
Front
Shelf Lip
PAGE 7 OF 27
OPTIONAL ACCESSORIES CONTINUED
Figure 19
Flange Nut
Figure 20
Shelf
Front "C"
Channel
16" DEEP BOX SHELF ASSEMBLY
1. Line up shelf brackets (8) with uprights at desired height.
2. Secure to uprights with four 1⁄" bolts and flange
nuts. (See Figure 22)
1½"
Shelf Bracket
Bolt
Upright
3. Place shelf (9) on brackets. Install to brackets with
four 5/8" bolts and flange nuts. (See Figure 23)
5/8" Bolts
Flange Nuts
16" DEEP BOX SHELF DIVIDER ASSEMBLY
1. Six box shelf dividers (10) are included with box shelf.
To attach, line up front and rear pre-drilled holes
on top of shelf. Fasten each divider with two Phillips
head bolts and two M6 flange nuts using a Phillips
screwdriver and 10 mm wrench. (See Figure 24)
Figure 22
Flange Nut
Figure 23
Shelf
Figure 24
Phillips
Head Bolt
M6
Flange Nut
0621 IH-7630