Uline H-7630 Manual Del Usuario página 4

BOTTOM SHELF DIVIDER ASSEMBLY
1. Four bottom shelf dividers (8) are included with
packing station. To attach, slide shelf dividers
in-between full depth bottom shelf and 4" high
storage shelf and line them up with two pre-drilled
holes in each shelf. Fasten each divider with four M6
Phillips head bolts and four M6 flange nuts using a
Phillips screwdriver and 10 mm wrench.
(See Figure 10)
Figure 10
PAGE 4 OF 27
ASSEMBLY CONTINUED
UPRIGHT ASSEMBLY
1.
Figure 11
Pre-drilled
Holes
2. Repeat with other upright.
Position upright (9) on back corner of tabletop.
Mounting plate should be positioned directly over
the previously drilled holes. Fasten four M6 x 70 hex
bolts and flat washers through uprights, tabletop
and legs using 10 mm wrench. Secure with four M6
flange nuts on underside of table. (See Figure 11)
Upright
M6 x 70 mm
Bolt
Washer
Flange
Nut
Leg
Mounting
Plate
Upright
0621 IH-7630