Lazy Susan/Burner Cover Assembly; Maintenance - Agio 98900 Instrucciones De Ensamblado

LAZY SUSAN/BURNER COVER ASSEMBLY

1. Place the lazy susan / burner cover on the table top as shown in Figure.12.
WARNING: BEFORE PLACING THE LAZY SUSAN/BURNER COVER ON, MAKE
SURE THE FIREPIT HAS BEEN SHUT OFF AND THE BURNER HAS
COMPLETELY COOLED DOWN.
The flames should look like those in Figure 13. To clean the burner, use a soft brush after
the burner has cooled completely. Never use a vacuum cleaner on the burner. It is
recommended that the fire pit be stored indoors during the winter if it will be subjected to
freezing temperatures. The LP cylinder must be disconnected and removed from the
appliance before the appliance can be stored indoors.
Figure 13
Jul-01-2015
Figure 12

MAINTENANCE

10