Communication Ports; Rs232 And Usb Connectors; Communication Slots - Gtec CPS Serie Manual Del Usuario

C
OMMUNICATION
The CPS is supplied with the following communication ports (see "Views of the CPS):
➢
Serial port available with RS232 connector and USB connector.
NOTE: the use of one connector automatically excludes the other.
➢
Expansion slots for additional COMMUNICATION SLOT interface boards
➢ Expansion slot for power relay boards (see section "MultiCOM 392 board")
RS232 USB C
AND
RS232 CONNECTOR
PIN # NAME TYPE
1 IN
2 TX OUT
3 RX IN
4
5 GND POWER
6 OUT
7
8 +15V POWER
9 WKATX OUT
C S
OMMUNICATION
The CPS is equipped with two expansion slots for accessory
communication boards that enable the equipment to communicate
using the main communication standards.
Some examples:
➢
Second RS232 port
➢
Serial duplicator
➢
Ethernet agent with TCP/IP, HTTP and SNMP protocol
➢
RS232 + RS485 port with JBUS / MODBUS protocol
For further information on the accessories available, visit the web
site.
P
ORTS
ONNECTORS
SIGNAL
Serial line TX
Serial line RX
Isolated power supply
15V±5% 80mA max
ATX power supply wake-up
LOTS
PIN #
- 97 -
USB CONNECTOR
4 3
1 2
SIGNAL
1 VBUS
2 D-
3 D+
4 GND