Kichler Starkk Manual De Instrucciones página 9

HANGING THE FAN
Step 8. Slip the coupling cover, canopy cover and canopy onto the downrod.
Thread the hanger ball onto the downrod, insert the cross pin through the downrod and
tighten. Tighten the set screw. (Fig. 9)
Step 9. Lift the motor assembly into position and place the hanger ball into the ceiling
mounting bracket.
Rotate the entire assembly until the "Check Tab" has dropped into the "Registration Slot"
and seats firmly. (Fig. 10)
The entire motor assembly should not rotate (left or right) when seated properly.
WARNING: Failure to reattach the cross pin and seat the "Check Tab" can cause the
fan to fall from the ceiling during operation. Take special care to make sure this pin is
reattached.
Downrod
Coupling cover
Hitch pin
Fig. 9
Registration slot
Fig. 10
52" Starkk
Canopy
Canopy cover
Set screws
Retaining clip
9
LED |
™