Lavor GV Vesuvio Instrucciones Para El Uso página 25

WARNINGS
Always wear protective gloves when cleaning the
machine.
Machine restart after a prolonged shutdown
Before restarting the machine after a prolonged
shutdown:
- check the level of water and detergent; fill the
tank, if necessary;
- let the machine idle for a while and make sure
that it runs correctly.
Interventions to be carried out by the builder
operators
Please find below a list of the maintenance ope-
rations to be performed with a precise technical
skilland therefore by the builder qualified ope-
rators.
The User must never carry out:
- any intervention on the electric system
- any intervention on the machine mechanic
parts
- any replacement of the electric components
WARNINGS
- For any adjustment, timing or replacement
interventions that are not described in this
handbook and that turn out to be necessary,
please contact the technical staff of the
machine Reseller or Builder.
Troubleshooting
see pag. 27
Please find below a list of all the possible troubles
that may occur on the machine.
Machine dismantling
In compliance with EC laws, or with the
regulations in force in the User.s Country, the
User must arrange for the demolition, disposal
and elimination of the different materials
composing the machine.
In case the machine - or any of its component -
must be scrapped, it is necessary to adopt all
the safety measures in order to avoid any risks
deriving from the dismantling of industrial
machinery.
A particular care must be taken during the
following phases:
- Disassembling of the machine from the wor-
king area
- Transport and handling of the machine
- Dismantling of the machine
- Separation of the different materials compo-
sing the machine.
To demolish and dismantle the machine, it is neces-
sary to observe some important rules for the safe-
guard of one.s
health and of environment where we live:
Eliminate any residue of oil and
grease from the machine; the
lubricating substances must not
be dispersed in the environment,
but regenerated or treated by a
Company specialised in the
dismantling or such products.
In case the materials used for the productive pro-
cess or the lubricants and the condensation waters
are not eliminated according to the Laws and Regu-
lations in force, there can be other additional risks
such as:
1) Environmental pollution
2) Intoxication of the people in charge
of the dismantling operations.
Refer to the National or Regional Laws relevant
to the elimination of industrial solid wastes
and toxic and noxious wastes, when carrying
out the separating, recycling or dismantling
operations of the materials;
25
EN