DeWalt DW955 Manual De Instrucciones página 13

work best are sulphurized cutting oil or lard oil; bacon grease will also
serve the purpose.
Operation as a Screwdriver
Select the desired speed/torque range using the dual range gear
shifter on the top of tool to match the speed and torque to the planned
operation.
Insert the desired fastener accessory into the chuck as you would any
drill bit.
Maintenance
CLEANING: With the motor running, blow dirt and dust out of all air
vents with dry air at least once a week. Wear safety glasses when
performing this. Exterior plastic parts may be cleaned with a damp
cloth and mild detergent. Although these parts are highly solvent
resistant, NEVER use solvents.
CHARGER CLEANING INSTRUCTIONS:
WARNING: Disconnect the charger from the AC outlet before
cleaning.
Dirt and grease may be removed from the exterior of the charger using
a cloth or soft non-metallic brush. Do not use water or any cleaning
solutions.
Accessories
Recommended accessories for use with your tool are available at extra
cost from your local service center.
CAUTION: The use of any non-recommended accessory may be
hazardous.
If you need any assistance in locating any accessory, please contact
D WALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD
E
21286 or call 1-800-4-D WALT. (1-800-433-9258)
E
MAXIMUM RECOMMENDED CAPACITIES
Low Range- 1
BITS, METAL DRILLING
WOOD, FLAT BORING
HOLE SAWS
Important
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
Full Warranty
D Walt heavy duty industrial tools are warranted for one year from date
E
of purchase. We will repair, without charge, any defects due to faulty
materials or workmanship. For warranty repair information, call 1-800-
4-D WALT. This warranty does not apply to accessories or damage
E
caused where repairs have been made or attempted by others. This
warranty gives you specific legal rights and you may have other rights
which vary in certain states or provinces.
In addition to the warranty, D
30 DAY NO RISK SATISFACTION GUARANTEE
If you are not completely satisfied with the performance of your
D WALT heavy duty industrial tool, simply return it to the participating
E
seller within 30 days for a full refund. Please return the complete unit,
transportation prepaid. Proof of purchase may be required.
FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-4-DEWALT for a free
replacement.
SAVE THESE INSTRUCTIONS
9
High Range- 2
3/8" 1/4"
1" 5/8"
1" 3/4"
WALT tools are covered by our:
E