Motor Housing - Hkoenig Km5 Manual De Instrucciones

1.Please follow points 1 to 4 as described under "Initial Operation".
2.Unscrew the biscuit attachment and select the desired biscuit cutter.
3.Put the mixture on to the filling tray and the filler neck.
4.Connect the device to a 220-240 V/50/60 Hz safety contact power socket.
5.Turn the mincer on by the screw (18).
6.If necessary, push the mixture further down with the pusher (21). Do not touch with
your fingers.
7.Hold the elongated mixture at the exit and cut it off at the desired length.
Cleaning
• Before cleaning remove the mains lead from the
socket.
• Never immerse the housing with motor in water!
• Do not use any sharp or abrasive detergents.
• After operation, all the accessories should be
cleaned as soon as possible in order to avoid
the ingredients stick on the accessories for long
time and difficult to clean.
• The meat grinder and salad maker should be
flushed against the tap and use brush to wash
(especially the food tray and blade of meat
grinder accessories and the cutter of salad
maker)
• Be careful you hand get hurt when cleaning。

Motor Housing

Only a damp rinsing cloth should be used to clean
the outside of the housing.