Kohler Elate 707618-8G79-BL Manual De Instrucciones página 15

11. Prepare the Fixed Panel
Remove the corner protectors from the fixed panel.
Align the top of the fixed panel wall seal with the top of the wall side edge of the fixed panel. Do not remove the
adhesive backing at this time.
Verify that the label on the panel will face the outside of the shower, then press the seal onto the panel.
Place the fixed panel into the channel in the threshold seal and lean the top of the panel against the header.
Verify that the top of the header and the top of the fixed panel are aligned.
Slide the fixed panel against the wall.
Mark the fixed panel hole locations onto the header.
Carefully remove the fixed panel and set aside in a safe location.
Kohler Co. 15
1460483-2-B