Electronics - The First Years Sweet Sleep Cocoon Manual De Instrucciones

Section 5 - Cocoon Operation and Use - continued
4. To adjust foot lock:
A. To put the cocoon in rocking mode, rotate
the foot lock up to lock in place.
Repeat for the opposite side.
B. To put the cocoon in non-rocking mode,
rotate the foot lock down and lock in place.
Repeat for the opposite side.
WARNING
• Always put cocoon in non-rocking mode when making
ANY adjustments.
5. To use electronics:
A. To install batteries, locate battery
cover on bottom of the vibration
unit. Use flat screwdriver to remove
1
battery cover . Insert 3 AA
batteries aligning the
2
+ and - contacts .
Replace battery cover.
1
Vibration on/off
2
Adjust volume
3
Melodies
9
2
1
1
2
3
Section 5 - Cocoon Operation and Use - continued
6. To use and adjust the harness:
A. Place child in the seat. Buckle the harness
by placing the side restraint buckle into the
crotch restraint buckle. Repeat for opposite
side.
B. Tighten the restraint by pulling on the loose
restraint strap, ensure that it is snug.
C. To remove the child, release buckle by
squeezing tabs on buckle to release.
Repeat for opposite side.
WARNING
Avoid pinch injury:
• When making adjustments, always ensure child's body parts
are clear of any moving parts.
Avoid serious injury from falling or sliding out:
• ALWAYS use seat belt to restrain child.
• NEVER leave child unattended.
Always keep child in view.
10