Section 5 Cocoon Operation And Use - The First Years Sweet Sleep Cocoon Manual De Instrucciones

Section 4 - Cocoon Assembly - continued
Assembly:
3. Attach upper seat tube to seat assembly:
A. Locate the Upper seat tube and slide
one end into the sleeve on the side.
B. Continue sliding upper seat tube all the
way around the sleeve until the tube
ends are both out of the sleeve.
C. Align the upper seat tube ends with
the holes in the hinge and push in
until it clicks and locks in place.
Note: pull on seat tubes to ensure
they are locked in place.
4. Attach seat assembly to frame:
A. Take the seat assembly and align the
tabs and pins with the corresponding
holes in the frame hub.
1 Tab holes
2 Pin holes
B. Push seat assembly in until it locks
in place.
7
1
2
Section 5 - Cocoon Operation and Use
1. To change position from seat mode to
Cocoon mode:
A. Slide seat lock on front of the seat
Rotate seat until it locks in place
2. To change position from Cocoon
mode to seat mode:
A. Slide seat lock on front of the seat
Rotate seat until it locks in place
3. To adjust the canopy:
A. Pull on the front of the canopy to adjust.
1
.
2
.
2
1
1
1
.
2
.
2
1
1
8