adapter marked 'L' is placed on the left side.
· Slide the adapters in the attachment parts and press solidly until you
hear a click.
Place the pram body (k)
· Orientate the pram body such that it is directed rearwards on the frame.
· Hold the pram body by the handles on both sides and place directly
above the adapters.
· Slide the pram body over the adapters and press solidly until you hear
a click on both sides.
· Check that the pram body has been placed horizontally and has been
attached properly by trying to lift it from the frame.
Remove the pram body (l)
· Hold the pram body by the handles on both sides. Press and hold the
unlock buttons.
· Lift the pram body in vertical direction of the adapters.
Remove the pram body adapters (m)
· Pull the unlock buttons on the inside of the adapters upwards and ver-
tically remove the adapters from the attachment points.
The hood (n)
· The hood can be unfolded by moving it upwards.
· Push and hold the buttons on both sides of the hood. The hood can
now be folded downwards.
The carry straps
· The carry straps must be clicked into the plastic components in order to
carry the pram body.
· Always ensure that the carry straps have been removed if a child is
placed in the pram body.
Assemble the rain cover on the pram body (o)
· Make sure that the hood of the pram body has been unfolded.
· Place the rain cover from top to bottom over the pram body and make sure
that the rain cover attaches well all around the bottom of the pram body.
The seat
· The seat is suitable for children from birth up to 55 lbs. (25 kg) and 42.7
inch (108 cm) in height. If your child is younger than 6 months always
use the pram body or the reclined carriage position of the seat.
EN
9