Recommended Settings - OHAUS SF40A Manual Del Usuario

APPLICATIONS
NOTE: Unit change during the application is not permitted.
• Maximum 999 samples.
• Sample weight must be in the range of 70 – 130% of the current average value.
• Minimum sample weights should be larger than 1d.
• During sample change, the scale reading needs to change by more than 100d or the printer will not
register the sample change.
• Statistics applications include: number of samples, average value, standard deviation, min., max. and
min-max differential and total weight.

RECOMMENDED SETTINGS

CONNECTED DEVICE
DV, AV, PA, AR,
SP, TA, NV, NVL, NVT,
MB35/45, MB23/25,
(T31P, T51P, T71P, T32XW, T32WE,
T51XW, T71XW, CKW)*
PAGE 6 OF 33
OPERATION CONTINUED
PRESS BRIEFLY
STATISTICS APPLICATION
Start Statistics Application
(LED on)
Add a new sample
and press
If needed, print subtotal.
Press
Print and end
Statistics Application
(LED off)
Printer Mode
Baud Rate: 9600
Bit/Parity: 8 bit None 1
Handshake: Xon/Xoff
TOTALING APPLICATION
DEVICE SETTINGS
PRESS AND HOLD
Start Totaling Application
(LED on)
Add a new sample
and press
If needed, print subtotal.
Press
Print and end
Totaling Application
(LED off)
PRINTER SETTINGS
Factory Settings
0721 IH-8093