LUND Rampage Products Trail Guard Instrucciones De Instalación página 3

Installation Steps
Install SLOPE BRACKET (4) bolts with (4) washers and (4) lock
9
Install original 3rd brake light onto brake light bracket with (4)
screws as shown below then plug in harness connection.
11
VERTICAL TIRE Mount option. Determine the height required based
on the size tires you have. Larger tire 35" plus will use lower 4
holes in bracket and 4 upper holes in tire swing.
13
Install original 3rd brake light onto brake light bracket with (4)
screws as shown below then plug in harness connection.
15
NOTE: SLOPE Tire Mounting Option Follow step 9-12 For VERTICAL Tire Mount step 13-16
washers.
Install tire mount onto the SLOPE tire bracket as shown. Note: We
recomend to set the tire mount into the lowest position.
10
Install small bracket to SLOPE tire carrier swing and then mount
the 3rd brakelight as shown below, then plug in harness.
12
VERTICAL TIRE Mount 3rd brake light to vertical mount as show
below using (2) Bolts (4) washers (2) lock washers (2) nuts.
14
VERTICAL TIRE Mount tire holding bracket. Note: We recommend to
set the tire mount into the width of the spare tire.
16
Page 3 of 4