Idiomas disponibles
Idiomas disponibles
With the help of the user instruction of the product and the inspection sheet, and without any specific tool or a particular measuring device. Observe and
touch each component of the product in order to detect possible anomalies. If one or more checkpoints are defective, the harness must be withdrawn from
service and replaced by a compliant device. The use of this document for periodic inspection is reserved for competent persons.
Rope's top tip : Verify the condition of the rope's top tip, the plastic thimble and the rope, the stitching
1
and the transparent protective sleeve. It should not be worn nor cut nor burnt nor damaged not stained
by chimical products such as paint, cement etc... that could weaken any component.
Marking : Check that the marking is present and readable .
2
Rope : Please refer to ropes inspection guide.
3
Rope's down tip : Make sure that the rope's down tip is present and check the condition of it's
4
transparent protective sleeve.
Guided type fall arrester : Check the condition of each component of the guided type fall arrester. It
5
should not be misshapen, nor cut, nor wear nor oxidized.
A
Body
Assembly axis
B
Cams
C
Cams spring
D
O-Ring
E
Functional inspection : Make sure that the guided type fall arrester slide on the rope on both side
6
(top and down). Verify that the device doesn't slide on locked position. Check that the O-ring (
and the cams (
Energy absorber : Please refer to Energy absorbers & lanyards inspection guide.
7
Connector : Please refer to connectors's inspection guide.
8
Overall Condition : Evaluate the overall condition of the product according to the above
checkpoints and the visual aspect of the product.
Kratos Safety 689 Chemin du Buclay, 38540 Heyrieux France Tél : +33 (0)4 72 48 78 27
Inspection Guide for Personal Protection Equipment
GUIDED TYPE FALL ARRESTERS ON KERNMANTLE ROPE - Visual / Functional checks (GB)
Inspect the visual aspect of the product; the device must be checkable.
) moves properly around their axis (
C
).
B
Fax : +33 (0)4 72 48 58 32
)
E
