Fein BF10-280E Serie Manual De Instrucciones página 13

Original Instructions.
en
Symbols, abbreviations and terms used.
Symbol, character Explanation
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Do not touch the rotating parts of the power tool.
Observe the instructions in the text or graphic opposite!
General prohibition sign. This action is prohibited.
Before commencing this work step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Use eye protection during operation.
Use ear protection during operation.
Gripping surface
Observe the information in the adjacent text!
Switching on
Switching off
Confirms the conformity of the power tool with the directives of the European
Community.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
WARNING
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environmental-friendly recycling.
Product with double or reinforced insulation
Low sanding-belt speed
High sanding-belt speed
(**) may contain numbers and letters
(Ax – Zx) Marking for internal purposes
Character Unit of measure-
ment, international
P
W
1
P
W
2
v
m/s
0
U
V
f
Hz
M...
mm
Ø mm
l
mm
1
l
mm
2
kg
Unit of measure- Explanation
ment, national
W Power input
W Output
m/s Sanding-belt speed
V Rated voltage
Hz
Frequency
mm Size of metric thread
mm Diameter of a round part
mm Sanding-belt length
mm Sanding-belt width
kg Weight according to EPTA-Procedure 01
en
13