Adjusting And Installing The Camera - Toguard H40 Trail Camera Manual De Instrucciones

21.Write protection
>This function can be used to protect individual recordings of all saved
recordings from accidental deletion.
>Select "Write-protect current file" to protect the currently selected
recording from accidental deletion.
>Select "Write-protect all files" to protect all saved recordings from
accidental deletion.
>Select "Unlock current file" to remove the write protection for the
currently selected recording.
>Select "Unlock all files" to remove the write protection forall saved
recordings.
6. ENTERING LIVE MODE

6.1 Adjusting And Installing The Camera

The SETUP mode is advantageous for determining the best possible
detection angle and range of the movement sensor. For this purpose,
attach the camera at approx. 1 -2m height to a tree and align the camera
with a desired direction.
For 1 meter height, Place the camera parallel to the ground.
For 2 meters height, Tilt the camera down five degrees to the ground.
Move slowly from one side of the
observed area to the other. Move
parallel to the camera. Try out
different angles and distances.
The blue LED flashing indicated that
you were detected by PIR sensor. In
this way you can determine the best
position for aligning the camera.
The blue LED only flash in the SETUP
mode as soon as the PIR sensor has
detected movement.
13
EN