Safety Note - Herth+Buss 95960031 Manual De Instrucciones

Operating Instruction

Safety Note

Always use the protective caps if the
charging cable is not in use.
These charging cables are to be used
exclusive for charging of electrical
vehicles (EV) according to ISO 17409
at electrical vehicle supply equipment
(EVSE) according to IEC 61851-1 Mode 3.
Other uses are not permitted.
The operation of this charging cable is
forbidden without interlocking function
and communication in accordance with
IEC 61851-1 and the isolation properties
of a switching device in accordance to
ISO 17409.
5
Warning
Electric current! Take special care of:
Contact to construction units, which
are electrical energized, can lead to
heavy injuries. Switch off the power
before beginning work.
Make a visual check of the charging
cable before start up.
Do not use the charging cable if
damage is visible. A damaged cable
shall be replaced immediately.
Your life is in danger.
Avoid creating a tripping hazard
with the charging cable.
Do not pull on charging cable
to move the car or to unplug it.
Make sure the charging cable is
not bent, pinched or run over
Make sure the plugs do not get
in contact with a source of heat or
with water.
95960031 | -033
Technical data: