Johnson Pump Ultima Bilge 600GPH Manual Del Usuario página 9

PUMP
***Make sure to have at least 1 inch
[5MM] of clearance from the sensors
on the Ultima Bilge pump to any wall
or souroundings. If there is not enough
clearance, the sensors may detect the ob-
ject and leave the pump running continu-
ously.***
Maintenance:
The Ultima bilge pump is designed to
be worry free and maintenance free.
However, care should be taken to make
sure that the impeller is clear of debris
for optimum pump functionality. Make
sure power is disconnected during main-
tenance of the pump. To access the im-
peller, remove pump from strainer by
depressing the side lock tabs on pump
body and pulling pump from strainer.
To clean the impeller, grab on to impel-
ler guards fins and rotate impeller guard
clockwise and pull straight out. Remove
and clean the impeller and pump from
all debris that has accumulated. Make
sure to clean any debris that has accu-
mulated on the strainer as well. After the
impeller is clean, replace impeller guard
by aligning tabs with slots and turning
counter-clockwise, making sure not to
over tighten. The guard should be rotat-
ed until it is firm. Place pump body on
to strainer making sure that both locking
tabs snap onto pump body.
Black to negative(-)
Brown to positive (+)
(Manual override)
Brown/white to positive (+)
(Automatic operation)
Depress
(2) tabs
Warranty Information
Johnson Pumps of America of 10509
United Parkway, Schiller Park, Illinois
60176 warrants to the original consum-
er purchaser that this product will be
free from defects in material and work-
manship, providing that the case is not
opened or the pump otherwise abused
for a period of three (3) years from the
date originally purchased.
Lock impeller guard
by twisting counter
clockwise
9