Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Reversing the Door
Remove the two screws from top bracket and replace
on the other side. You will need to first remove the
plastic caps from the other side.
(
The introduction above is only for reference. The actual configuration will depend on
the physical product or statement by the distributor)
Check that the door is
aligned horizontally and
vertically and that the seals
are closed on all sides
before finally tightening the
bottom hinge.
Re-adjust the levelling feet.
Slide the appliance door back on to the top hinge
making sure it is the right way up.
Screw the bottom hinge into place on the new side.
Replace the other foot on the other side.Replace the
plastic covering by clicking back into position on the
door hinge.
9
Tabla de contenido
