Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch GOF Professional 1250 CE Manual Original

16 | English
30 Open-end spanner with width across flats of 19 mm
31 Extraction hose (Ø 35 mm)*
32 Parallel guide
33 Rod for parallel guide (2x)
34 Wing bolt for parallel guide fine adjustment (2x)
35 Wing bolt for parallel guide coarse adjustment (2x)
36 Adjustment knob for parallel guide fine adjustment
37 Adjustable edge guide for parallel guide
38 Extraction adapter for parallel guide*

Technical Data

Plunge router
Article number
Rated power input
No-load speed
Speed preselection
Constant electronic control
Soft starting
Connection for dust extraction
Digital depth display
Light ring
Tool holder
Plunge depth
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.

Noise/Vibration Information

Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 76 dB(A); Sound power level 87 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2 2
a =7.0 m/s , K=1.5 m/s .
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
1 609 92A 0LW | (21.1.14)
39 SDS guide-bushing adapter
40 Fastening screw for guide bushing adapter (2x)
41 Release lever for guide bushing adapter
42 Guide bushing
43 Pan head screw for guide plate fixing (5x)
44 Centring pin
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GOF 1250 CE
3 601 F26 0..
W
-1
min 10000 – 24000
mm
inch
mm
kg
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardisation documents: EN 60745
according to the provisions of the directives 2009/125/EC
(Regulation 1194/2012), 2011/65/EU, 2004/108/EC,
2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM 9
D-70745 Leinfelden-Echterdingen
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
10.07.2013
GOF 1250 LCE
3 601 F26 1..
1250 1250
10000 – 24000




–
–
6 – 8 6 – 8
¼
60
3.6
/II
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Bosch Power Tools






¼
60
3.7
/II