Installing The Product - Thinkware U1000 Seguridad, Garantía Y Guía De Inicio Rápido

Installing the product

1. R efer to the figures below to install the camera to the windshield.
1
2. Remove the product from the mount, and then push the mount against
the windshield to fix it firmly.
3. Reattach the product to the mount, and then adjust the camera angle.
The product may fall and be damaged during vehicle operation if it is not
firmly fixed to the mount.
• To confirm the camera angle, record a video after installation and check
the video using the mobile viewer or the PC viewer. If necessary, adjust
the camera angle again.
• If you need to remove the mount from the windshield to alter the
installation location, be careful not to damage the windshield's film coat.
3
2
Select an installation
location that can record the
entire view in front of the
vehicle without obstructing
the driver's vision. Ensure
that the front camera lens is
located in the center of the
windshield.
4
9