Kalorik EPCK 44847 BK Manual Del Usuario página 13

Olla a presión 6-en-1 multiuso
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Select the preset that you want to cook with and adjust the time as
necessary.
Once the setting has been selected, press 'Delay Time' and keep
pressing the 'Delay time' button to adjust the time to your desired
starting time (up to 12 hours delay). Time can be delayed in 30
minutes increments up to 12 hours. The delayed start pilot light will
turn on.
The appliance automatically starts the delay time countdown 10
seconds after the selection of a preset.
Once the delayed time is complete, the pressure cooker will
automatically start the cooking process.
Note: Delayed time can also be set before selecting one of the presets.
'Keep Warm' setting
This program reheats or keeps cooked food warm for extended periods
of time. This mode can be selected as a preset or is automatically
selected after the cooking time is elapsed, unless user presses the
"Start/Stop" button after the unit has beeped to switch off the unit.
Food can be kept warm up to 10 hours.
Note: The unit will turn to keep-warm automatically after it finishes a
cycle of pressure cooking, but some residual pressure might still be
present in the cooking pot. You can release this pressure manually or
simply wait for the pressure to release naturally.
Using the accessories
The provided heat resistant rack can be used for cooking foods that
need to be cooked without direct heat from the bottom of the cavity
or those that do not need to come into contact with water. The rack
can be a great accessory for steaming foods and for making cakes
(using the 'Cake' preset). To use the rack for making cakes:
Place the rack inside the empty removable pot.
Add about 1.5 cups (12oz) of water to the pot so that the rack
surface is above the liquid.
Add the food either by placing it directly on the rack or by
placing it in a heat-resistant bowl or a baking pan (in the case
of cake).
www.KALORIK.com
13
EPCK 44847 - 180330
Tabla de contenido
loading

Tabla de contenido