SOUNDMASTER Highline UR 922 Manual Del Usuario página 8

Action (during data adjustment)
- Press |<< / MONTH-DAY / °C/°F button (2) to adjust data backward.
- Press >>| / YEAR / DST button (4) to adjust data forward
- Keep depress |<< or >>| button for 2 seconds to enable auto forward
2. SETTING ALARM OUTPUT AND ALARM ON/OFF
A. Change the alarm output
Press AL 1 (8) / AL 2 (9) button to music ♫ position to select wake up by Radio, set to Buzzer
position to select wake up by Buzzer, set to Alarm off position to disable all alarm.
Select the Display Auto off / low / high dimmer (17) to the Auto off mode, alarm wake up the display
is auto turn on.
3. ALARM DURATION AND SNOOZE FUNCTION
Alarm Duration – Buzzer alarm or Radio alarm will continue output for 30 minutes if no key press,
then it will stop automatically and wait for same alarm time on next day.
Action for Snooze:
- During alarming, press Snooze button (1) will enable snooze function, Buzzer alarm or Radio alarm
will stop.
- Snooze interval is 9 minute (not incl. second offset)
- Snooze will continue unless press On/off button (5) to alarm off of Buzzer alarm or Radio Alarm stop
automatically after 30 minutes.
- Select the display Auto Off / Low / High dimmer (17) to the auto off mode, during alarming display auto
turn on, press snooze / sleep button (1) will enable snooze function, butter alarm or radio / display will
stop & off.
4. CHANGE DISPLAY CONTENT
A. Press |<< / MONTH-DAY / °C/°F button (2) during normal can switch to display Month-Day after 5
seconds timeout and return back to display time.
B. Press >>| / YEAR / DST button (4) during normal can switch to display Year, after 5 seconds
timeout and return back to display time.
5. SLEEP FUNCTION
During radio on mode, press Snooze/Sleep button (1) to turn on Sleep mode, the sleep time will
keep flashing by 5 seconds, within 5 seconds and press Sleep button can change the duration from
90 min – 15 min. Press On/Off button (5) to cancel sleep function.
DST – Daylight saving time
Press >>| / YEAR / DST button (4) and hold for 3 seconds to toggle on and off DST function.
RADIO OPERATION
- Press the On/Off button (5) to turn radio On.
- Select AM/FM band press the AM/FM band button (7)
- Select the station using the Tuning Knob (15)
- Turn the volume knob (16) to adjust volume as required
- Press the On/Off button (5) to turn radio off.
Note:
- The AM band use an internal directional aerial, rotate the radio for best reception.
- Ensure that the FM antenna (22) is completely unrolled and extended for best FM reception.
RESET
The reset button (21) is located on the back of unit. Use a ballpoint pent to press it whenever you
change the batteries, or unit is not performing as expected. This will return all settings to default value,
and you will lose any stored data (alarm and clock settings).
PROJECTION UNIT
- Focus setting: Adjust the projection clock brightness/focus by turning the brightness/focus
adjustment wheel (12) until the projected time is clearly shown on the ceiling or wall.
- To flip projected image by 180°, press 180° flip button (18)
ENGLISH
ENG 2