Alcad SCM-051 Manual Del Usuario

V I D E O P O R T E R O
CONNECTION BRACKETS
9630031 SCM-051
SOPORTE CONEXIONES MONITOR 2 HILOS
9630025 SCM-050
9630031 SCM-051
2-WIRE MONITOR CONNECTION BRACKET
9630025 SCM-050
Support for wall fixing of the video door entry system monitor, for 2-wire video door
entry systems. Element in which all the connections of the video door entry system of
the dwelling are made, enabling the monitor to be connected to the rest of the installation.
It can be fixed to a wall or to a standard electrical box.
For the monitor and connection bracket to operate properly together, a code must be
assigned to each connection bracket so that it can be identified within the installation
(this is referred to as programming the connection bracket). The code is stored in the
non-volatile memory of the connection bracket.
9630031 SCM-051
SUPPORT DE CONNEXIONS MONITEUR 2 FILS
9630025 SCM-050
RECOMENDACIONES - RECOMMENDATIONS - RECOMMANDATIONS
When deciding where to position the connection support, choose an area of wall which is smooth, even and hard. Bear in mind the
dimensions of the monitor which will later be connected to the connection bracket, ensuring that you leave sufficient space on the left-
hand side of the connection bracket
standard electrical box, make sure that this is properly aligned with the wall. By doing so, you will ensure that the monitor is firmly
held in place.
Avoid places where there are sources of direct light, thereby preventing undesired reflections on the screen of the monitor. Similarly,
avoid sources of strong heat, damp or steam, which could reduce the operational life of the equipment.
2 H I L O S - 2 - W I R E
to be able to access the call volume control on the monitor. If the bracket is fixed to a
V I D E O D O O R E N T R Y S Y S T E M S - V I D É O P O R T I E R
Monitor and connection bracket size
A
A = 207mm
B = 25mm
2 F I L S
B
A = 197mm
B = 20mm