Setting The Brightness; Using Vox (Peep) Mode - Levana Jena Manual Del Usuario

OPERATION

Setting the Brightness

Brightness Mode sets the brightness of the the screen. Brightness Mode
also extends the battery life.
1. To set the Brightness Mode, press the
icon.
2. Use the
VOLUME arrows (side) to increase/descrease the
brightness level.

Using VOX (PEEP) Mode

When in VOX (PEEP) Mode, the monitor enters standby/sleep mode after 1 minute of inactivity. When sound is detected, the
screen changes to live view.
• To access live view manually when the screen is off, press the POWER
•
VOX (PEEP) Mode can extend the battery life to more than 12 hours without recharging.
1. To set VOX (PEEP) Mode, press the
VOX icon.
2. Use the
VOLUME arrows (side) to increase/decrease the
sensitivity to sound.
NOTE: The Peep Mode feature for this monitor only works on the primary camera (Camera 1). When additional cameras are
paired with the monitor the Peep Mode will still only activate when sound is heard on the primary camera (Camera 1). The
Peep mode will deactivate itself when in sequential/sequence on any monitors that support sequential/sequence mode.
/ button until you see the
/ button until you see the
18
Note: Low brightness levels
reduce battery consumption and
extends the battery life.
Note: Lower sensitivity levels
reduce battery consumption and
button ONCE.
extends the battery life.