Operation; Turn The Monitor On/Off; Pairing The Cameras & Monitor - Levana Jena Manual Del Usuario

OPERATION

Turn the MONITOR ON/OFF

• Press and hold the POWER
• Press and hold the POWER
Pairing the Camera(s) and Monitor
The camera and monitor come paired (connected) to each other automatically. However, if upon opening this package the
devices do not automatically connect and transmit, you may do so manually. To pair additional cameras, follow the steps
below and be sure to assign a different camera number to each additional camera.
Note: Before you begin pairing, be sure to have the monitor and the camera(s) side by side.
1.
To pair your camera and monitor, press and hold the
select a camera number.
2.
Press the / button ONCE. The PAIRING LED flashes red quickly (on monitor).
3.
Quickly press and hold the PAIRING
paired camera confirming pairing is successful. Video/audio will be transmitted automatically.
Press and hold
Select a channel
button on the side of the monitor to turn the monitor ON.
button again to turn OFF the monitor.
button on the BACK of the camera. A checkmark
Press
button on the monitor. Use the
Flashing
12
VOLUME arrows (side) to
will appear next to the
Press and hold