Multipin Connector - VALPES AXMART MT Serie Manual Del Usuario

To wire the actuator, unscrew the 4 CHC M6x30 screws, and the 4 M3x10 screws. The wiring can be realized without tool,
just raising the strips in front of each pin.
For the reassembly, make sure that the seal is correctly positionned in its groove to ensure tightness.
26
Seal
Male connector
4 x CHC M6x30 inox A2 screws
Connector cover
3 x ISO M20 x 1,5 cable glands
4 x M3x10 screws