Tabla de contenido
Idiomas disponibles
Idiomas disponibles
If video source is in mono:
1.- Locate the RCA connectors into the modulator, then insert one AV
cable on them. For audio connections, use one of the connector and
insert it in L or R input jack.
2.- Plug the other end into AV device output jacks.
Make sure the colors match on both equipments.
You can connect up to 3 or 4 devices per modulator, depending of
the model.
CONNECTING F CABLE
If you have a device connected to F connector on TV set (such as VCR
or Cable) unplug the coaxial cable from the TV set and plug into the
ANT IN connector in the modulator.
Then, plug other coaxial cable from TO TV output jack on the modulator
to F connector on TV set.
If you don't have any device connected to F connector on TV, just plug a
coaxial cable from TO TV output to F connector on TV.
ENGLISH-03
Tabla de contenido
