Intec 420220 Manual De Instrucciones página 3

Idiomas disponibles

Idiomas disponibles

FOREWORD:
We thank you for buying this qualified product. Before using this
product, carefully read these instructions and become acquainted with
the safety symbols.
GENERAL SAFETY REGULATIONS
PRODUCTS LABEL)
This product is designed and made only for lifting vehicles.
Never lift loads on sloping, uneven or soft ground.
Before starting lifting, it is necessary to block the vehicle by
placing two wedges by the wheels, as shown on the label.
Make sure that the vehicle lifting point suggested by the car
manufacturer is stable and properly centered on the jack saddle.
After lifting the load it is absolutely essential to rest it on
car stands.
USE
(ALSO SEE SAFETY SYMBOLS ON THE PRODUCTS LABEL)
Insert the handlebar into the handle fork of the jack.
Check if the pressure release valve is closed (turn clockwise).
Make sure that the vehicle lifting point suggested by the car
manufacturer is stable and properly centered on the jack saddle.
Start lifting and do not exceed the rated load.
After lifting the load, always place car stands.
To lower the jack, remove the car stands and slowly open the
pressure release valve (turn counter clockwise).
MAINTENANCE:
Keep the jack at minimum height when not in use. Make sure that
the pressure release valve is closed.
Keep the jack clean and check the oil level at least twice a
year.
GUARANTEE:
This product is fully guaranteed against manufacturing defects for a
period of 36 months from the date of purchase.
If your product proves faulty during the guarantee period, it
should be returned to the place of purchase together with the original
receipt.
INSTRUCTION MANUAL (GB)
:
(ALSO SEE SAFETY SYMBOLS ON
:
loading