No-Mar Tip; Jam Clearing; Cleaning; Storage - Powermate VX BNCS2P Manual Del Usuario

FIG. 13
USING THE NO-MAR TIP
WARNING
When attaching or detaching the No-Mar Tip, be sure to
remove your finger from the trigger and disconnect the air
hose from the nailer.
If you like to protect the surface of workpiece against
scratches or markings made by the safety, attach the
accessory No-Mar Tip to the safety.
To replace the No-Mar Tip:
1. Disconnect air hose from tool.
2. Put the No-Mar Tip to the toe of the safety.
To remove the No-Mar Tip: Pull the no mar tip directly away
from tool.
NOTE: The nose cap may reduce nailing depth due to its
thickness. Re-adjustment of nailing depth is required.
FIG. 14
Safety

No-Mar Tip

MAINTENANCE

JAM CLEARING

Remove a jammed nail in the following order:
1. Disconnect air hose.
2. Remove all nails.
3. Pull up on the latch (A) and open the jam release (B).
4. Using caution not to bed or damage the driver blade,
using pliers or screwdriver if required to clear the
jammed fastener.
Nail Indicator
5. Close the jam release and latch.
6. Reconnect the tool to the air resource.
7. Reload the tool with fasteners.
FIG. 15
Latch (A)

CLEANING

WARNING
When cleaning a tool be careful not to disassembly any
portion of the tool since internal components may be
misplaced or safety components may be improperly
mounted. Certain cleaning agents such as gasoline, carbon
tetrachloride, ammonia. etc. may damage plastic parts and
o-rings.
WARNING
Do not attempt to clean by inserting pointed objects
through openings. Sharp edges may damage internal
components causing a serious hazard.
Ventilation openings, the work contact element, and the
trigger must be kept clean and free of foreign matter.
Periodically clean the tool with compressed air.
Clean the magazine. Remove metal or wooden chips which
may have accumulated in the magazine. Periodically clean
magazine with compressed air.

STORAGE

WARNING
Keep out of reach of children and personnel unfamiliar
with tool operation. Lock the storage area. Tools are
dangerous in the hands of personnel unfamiliar with the
tool.
When not in use, the tool should be disconnected and stored
in the storage case in a warm and dry place. When tool will
not be in use for an extended period, apply a thin coat of the
lubricant to the steel parts to avoid rust.
Do not store the tool in a cold weather environment.
8- ENG LISH
Jam Release (B)