Klarstein Heizung Manual Del Usario página 17

Timer: Automatic switch-on
Note: This function should only be set if you want the heater to turn on automatically
after a specified time (1 to 24 hours from the time of setting). Set the timer in standby
mode.
1. Press the Standby button (f) to turn on the unit. The power indicator (plug symbol)
lights up. The unit is in standby mode.
2. Press the timer button (d), the light (H) lights up and the number of starting hours
(0.0) flashes.
3. Use the [+] and [-] keys to set the operating time of the heater between 1-24 hours.
Between 0.0-5.0 hours the time can be set in 0.5-hour increments, between 5-24
hours the time can be set in 1-hour increments. Then wait briefly until the hour digit
no longer flashes. The countdown time is now shown on the display.
4. The heater switches on automatically when the time has elapsed.
5. Once you have set the on timer, open the Eco mode. Then make the temperature
settings in ECO mode so that the heater switches on at the desired temperature or
power.
Note: Since the heater may switch on unattended in Timer mode, be sure to follow
the safety instructions.
Timer: Automatic switch-off
Note: This function should only be set if you want the heater to turn off automatically
after a specified time (1 to 24 hours from the time of setting).
1. Press the timer button (d) while the heater is running, the light (H) lights up and the
number of start hours (0.0) flashes.
2. Use the [+] and [-] keys to set the heating operating time between 1-24 hours.
Between 0.0-5.0 hours the time can be set in 0.5-hour increments, between 5-24
hours the time can be set in 1-hour increments. Then wait briefly until the hour digit
no longer flashes. The countdown time is now shown on the display.
3. The heater switches off automatically when the time has elapsed.
EN
17