Ariston CHAFFOTEAUX ERX 2000 Manual De Instrucciones página 13

associating the wireless device
ROOM SENSOR
- Position the room sensor so that it is
close to the aerial.
- Check that the aerial is powered up
(green led on).
- Power up the room sensor with its two
batteries (included in the kit).
- Hold the button on the aerial down for
5 seconds; the red led will start fl ash-
ing.
- Hold the "+" key on the room sensor
down for 5 seconds (Fig. 6). The display
will alternate between the software ver-
sion and modifi cation index.
- Hold "+" down for 5 seconds again to
enter the technical parameters menu;
parameter "rF01" will display (Fig. 7)
- Press "OK" .
- Hold "OK" down for 3 seconds again to
launch the association procedure.
- Once the association procedure has
terminated, the display will show the
updated number of associated devic-
es. The aerial's red led will go out.
(If the association procedure fails, the
red led on the aerial will stay on. In
this case, repeat the procedure as de-
scribed above.)
Fig. 6
Fig. 7
x 5s
x 5s
GB - 13