Ariston CHAFFOTEAUX ERX 2000 Manual De Instrucciones página 11

installation
Positioning and installation
Install the aerial well away from electromagnetic fi elds (for example: televisions, comput-
ers, refrigerators, microwave ovens), as these could aff ect the operation of the device.
Take extra care when positioning the device near lifts, stairways and metal wall struc-
tures, as these may have an isolating eff ect with regard to signal transmission and re-
ception. Install in an environment with normal pollution levels
Warning!
Installation should be performed by a quali-
fi ed technician.
Before connecting the receiver, disconnect
the power supply.
Power supply of the device must beconnect-
ed to a circuit breaker.
Wall installation
- Open the cover by pressing lightly on the
tab at the bottom of the aerial (Fig. 1).
- Fix the aerial's base to the wall at the cho-
sen position, using the plugs and screws
supplied with the kit (Fig. 2).
Electrical connections
- Connect the aerial power feed to an electri-
cal socket (230 V).
NC NC
1 2 3 4 5 6
IMPORTANT: If you need to use a repeater, you must fi rst associate the device being installed
(external sensor, room sensor or zone module) with the aerial, then associate the device with
the receiver (see receiver manual).
230V
50/60 Hz
NC NC
L N
Fig. 1
Fig. 3
BUTTON
RED LED
Fig. 2
GREEN LED
GB - 11