Trevi FRS 1380 R Guia Del Usuario página 11

ENGLISH
JACK-JACK CABLE AND RCA-JACK CABLE
Jack-Jack cable
POWER ADAPTER AND POWER CORD
Power supply with Mini USB cable for
transmitter battery recharge
INSTRUCTION FOR USE
Connect the power adapter to the MINI USB charging port on
the transmitter.
Connect your audio source to the transmitter using 3.5mm au-
dio cable. To start listening, adjust the volume of the audio at half
the intensity in your player.
Turn the B/A/OFF button to A or B channel to power on the
transmitter and switch channels.
The blue LED will light up to indicate the transmitter power on.
Press the Power ON/OFF button to power on the headphone,
the LED will light up to indicate the headphone power on and
light color is red. Press the Power ON/OFF button again to scan
the signal from the transmitter. Lower the volume, before putting
on the headphones to avoid a very loud volume. If the audio
quality is not adequate or if interference is heard, select another
Jack-RCA cable
Micro USB/ USB power cable for
charging headphone battery
PAG.11
FRS 1380 R