Additional Functions - Maxx Ice MIM360N Manual Del Usuario

ADDITIONAL FUNCTIONS:

Draining Function: press the "Clean" button and hold for 6 seconds, the machine will go into the
draining water mode automatically. The words "Purging Water" appear on the LCD screen. The words
disappear after 3 minutes and the draining process stops.
NOTE: Draining function is only effective in either the "Water Fill" process or the "Cleaning" process
modes.
Self-checking Function: when the ice maker runs, the control board will check the condenser probe,
evaporator probe, high condenser temperature, water shortage, long freeze, long harvest and water curtain
function, if one of them defaults, the exclamation mark will appear and blink on the left bottom corner of
the LCD screen. At this time press "ADJUST" button, the cause of default will appear on the LCD screen.
Purging cycle interval Optional Function: during "Water Fill" process, press and hold the "CLEAN"
button and "ADJUST" button together for at least 3 seconds. The unit will enter the "Purging Optional"
process, the words "Purging Optional" and "20 Cycle" (Note: The cycle number may display other
number) appear on the LCD screen. During this period, you can press the "MODE" or "CLEAN" button
for the desired purging cycle interval. You can choose any purging cycle interval from 0 to 20.
After 10 seconds without any operation, the unit will automatically memorize the current status and return
to the previous process.
NOTE: Only when the machine is in "Water Fill" process can the purging cycle interval Optional
Function be accessed.
IMPORTANT: The 20 Cycle Purging Interval is factory set for optimum performance. You can
change it according to the quality of the supply water and the clarity of your produced ice cubes.