Maxx Ice MIM360N Manual Del Usuario página 3

5. When the ice storage bin is full, the words "Bin Full" displays on the LCD screen. The ice maker
stops producing another batch of ice.
6. When ice cubes are taken out from the ice storage bin, releasing the water curtain, the ice machine will
assess the status for three minutes. During this period, the words "Bin Full Release" and "3 Min To
End" displays on the LCD screen, "Bin Full Release" flashes until the words "3 Min To End" change
to "0 Min To End", then ice maker will start to make a new batch of ice automatically.
TO CLEAN THE ICE MACHINE:
! Press the ON/OFF button first, then press it ON again.
! During "Water Fill" process, press the "CLEAN" button, the ice maker will start the cleaning
process. The words "Cleaning", "Add chemical" and "30 Min To E
! In the first minute, the words "Add chemical" will flash to remind you to pour the Ice Maker
Cleaner Solution into water tank until the words "30 Min To End" change into "29 Min To End",
the words "Add chemical" disappear and the water pump runs, and ice maker goes into cleaning
process.
! The ice-making system cleaning cycle will continue until the words "30 Min To End" change to "0
Min To End", the cleaning process stops and the ice machine is in suspend mode.
! You can press the ON/OFF button to stop the cleaning cycle any time during the cleaning mode.
! If you want to make ice cubes after cleaning, press the ON/OFF button twice, the next ice-making
cycle will begin.
NOTE: Pressing the CLEAN button has no effect when the ice maker runs during any of the
following processes, ice-making, harvest or bin full.
" display on the LCD screen.
nd