Cleaning And Transport; Troubleshooting - Klarstein 10029304 Manual Del Usuario

Ocultar thumbs Ver también para 10029304:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Temperature Settings
There are three touch-buttons on the control panel: The arrow button increases or decreases the set tempera-
ture by 1 °C (temp range is 11-18 °C). The light button turns on or off the interior light.
This product is designed for max imum cooling of 14°C below ambient temperature. When the ambient tem-
perature around 25 °C or less, unit can maintain a temperature range between 11-18 °C.
Cleaning
• Unplug the wine cooler and remove the bottles.
• Wash the inside with a warm water and baking soda solution. The solution should be about 2 tablespoons
of baking soda to a quart of water.
• The outside of wine cooler should be cleaned with mild detergent and warm water.
Transport
• Remove all the bottles.
• Securely tape down all loose items inside your wine cooler.
• Turn the leveling legs up to the base to avoid damage.
• Tape the door.
• Be sure the wine refrigerates stays in the upright position during transportation.
Problem
Wine cooler do not operate.
Wine cooler is not cold enough.
The light does not work.
Vibrations.
The wine cooler seems to make
too much noise
The door will not close properly.

Cleaning and Transport

Troubleshooting

Possible Cause
Not plugged in. The circuit breaker tripped or a blown fuse.
Check the temperature control setting.
External environment may require a higher setting.
The door is open too often.
The door is not closed completely.
The door seal does not seal properly.
The wine cooler does not have the correct clearance.
Check the service center.
Check to assure that the wine cooler is level.
The wine cooler is not level.
Check the fan.
wine cooler is not level.
The doors were reversed and not properly installed.
The seal is weak.
8
Tabla de contenido
loading

Tabla de contenido