CONTROLS AND FEATURES
Temperature Controls
Temperature Display is located on inside of left-hand
refrigerator door. To change the temperature, press and
release the REFRIGERATOR or FREEZER pad. The
ACTUAL TEMP light will come on and the display will show
the actual temperature. To change the temperature, tap
either the REFRIGERATOR or FREEZER pad until the
desired temperature is displayed.
To turn OFF cooling system, press and hold the
REFRIGERATOR and FREEZER pads simultaneously for
3 seconds. When the cooling system is OFF the display
should read OFF.
To turn ON cooling system, press either REFRIGERATOR
or FREEZER pad. The display will show the preset
temperature settings of 37°F (2.77°C) for refrigerator and
0°F (-17.77°C) for freezer. Turning the cooling system off
stops the cooling to refrigerator, but it does not shut off the
electrical power.
NOTE: The refrigerator is shipped with protective film
covering the temperature controls. If this film was not
removed during installation, remove it now.
NOTE: For optimal temperature performance, we
recommend to avoid placing food items directly at the air
flow vents of the refrigerator air tower and thus blocking the
air flow.
Door Alarm
The door alarm will sound if either door is open for more
than 2 minutes. The beeping sound will stop when you
close the door.
Icemaker
Press to turn the icemaker on or off.
Lock Controls
Press and hold for 3 seconds to lock or unlock the
refrigerator and freezer controls.
Reset Filter
Press and hold for 3 seconds after replacing the filter to
reset the timer.
6
Refrigerator
Hold 3 Sec for °F/°C
Recommended: 37 °F
Actual Set
F
Energy Smart
Recommended: 0°F
Freezer
Energy Smart Override
Hold 3 Seconds
Door Alarm
Ice Maker
Lock Controls
Hold 3 Seconds
Reset Filter
Hold 3 Seconds
49-1000494 Rev. 0