Electrical Precautions And Shock Hazards - Watts TRITON TRCU1 Guía Del Usuario & Manual De Instrucciones

All manuals and user guides at all-guides.com
Important Safety Information

Electrical Precautions and Shock Hazards

DANGER
TRITON is electrically-powered equipment. You MUST follow all precautions necessary for
working with and around electricity and electrical equipment or risk death or serious personal
injury.
properly-grounded electrical outlet (recep-
tacle). Make certain that plug matches the
electrical outlet (receptacle). Never modify
the plug or electrical outlet (receptacle) in
any way.
nections. If a properly-grounded electrical
outlet (receptacle) is not available, do not
use this equipment.
ing BEFORE using the equipment. Do not
use the equipment if the GFCI plug is not
working.
Fuser Cord is frayed, cut, or damaged in
any way. Replace with a new Watts sup-
plied cord before using the equipment.
from sharp or abrasive surfaces, moving
machine parts, and heat sources.
manufacturers. Only use TRITON Power
Cords and Fuser Cords with the system.
Substituting alternative equipment may
cause personal injury or damage to the
equipment, or void the product warranty.
pull, lift, or move the equipment. Pulling
on the cords can break or damage them,
increasing the risk of electric shock or
electrocution.
8
tangles, twists, knots, or kinks.
rated for outdoor use.
uids. Do not place equipment in standing
-
water or liquid during use. These actions
increase the risk of electrical shock and
equipment failure.
-
cal storms. Turn off and unplug (discon-
nect) the equipment from the electrical
outlet (receptacle) and store the unit
indoors if lightening is forecast.
equipment BEFORE cleaning, servicing,
or repair. Never attempt to clean, service,
or repair the equipment unless it is com-
pletely off and unplugged.
or Fuser case (housing). There are no
serviceable parts inside the Control Unit
or Fuser.
-
-