Troubleshooting; Technical Data - makro GDF3004 Manual De Instrucciones

Cleaning and maintenance
DISPOSAL OF USED OIL AND FAT
• Pour used oil into suitable container (bottle) and seal it well.
• Wrap solid fat in paper.
• Do not dispose with your normal household waste. Check with your local authorities regarding proper disposal methods of used oil.
Environmental Protection
Discarded electric appliances are recyclable and should not be discarded in the domestic waste! Please actively support us in
conserving resources and protecting the environment by returning this appliance to the collection centres.
GB
If the end of the useful life is reached, please make the device useless by pulling the plug from the wall outlet and cutting off the cable.

Troubleshooting

Problem
The power plug (6) is connected to an
electrical outlet but the power indicator
(17) does not light up and the appliance
does not heat up.
After a while, the appliance stops
working.

Technical data

Operating voltage:
Power consumption:
Dimension (W x D x H):
Oil reservoir filling level:
Weight:
Operating voltage:
Power consumption:
Dimension (W x D x H):
Oil reservoir filling level:
Weight:
(IM)601-000170_MAKRO_Deep fryers_booklet_V2_210217.indb 71
Cause
• The power plug (6) is not connected well.
• The fuse of the power supply has been
triggered.
• The control unit (4) is not installed correctly.
• The overheating protection has been
activated.
• The overheating protection has been
activated.
GDF3004 GDF3024
220 - 240 V ~ , 50/60 Hz 220 - 240 V ~ , 50/60 Hz
2500 W 2 x 2500 W
270 x 380 x 310 mm 490 x 380 x 310 mm
Min. 3.5 l Min. 2 x 3.5 l
Max. 4 l Max. 2 x 4 l
5.6 kg 10.2 kg
GDF5008 GDF5028
220 - 240 V ~ , 50/60 Hz 220 - 240 V ~ , 50/60 Hz
3250 W 2 x 3250 W
300 x 470 x 420 mm 600 x 470 x 420 mm
Min. 6.0 l Min. 2 x 6.0 l
Max. 8 l Max. 2 x 8 l
9.2 kg 16.5 kg
Solution
• Unplug the power plug and re-plug it
properly.
• Check the fuse. Try to connect the
appliance to another electrical outlet.
• Check if the control unit (4) is at the
correct position. Reinstall the control unit.
• Press the RESET button on the control
unit.
• Press the RESET button on the control
unit.
GDF3008
220 - 240 V ~ , 50/60 Hz
3250 W
640 x 260 x 390 mm
Min. 6.0 l
Max. 8 l
7.40 kg
71
GDF3028
220 - 240 V ~ , 50/60 Hz
2 x 3250 W
640 x 550 x 390 mm
Min. 2 x 6.0 l
Max. 2 x 8 l
13.82 kg
21/2/17 4:02 pm