Craftmade Mia Guia De Instalacion página 6

5. Fan Assembly. (cont.)
With the hanging bracket secured to the outlet
box and able to support the fan, you are now
wood
safety cable loop
ready to hang your fan. Grab the fan firmly with
ceiling
two hands. Slide downrod through opening in
joist
hanging bracket and let hanging ball rest on the
hanging bracket. Turn the hanging ball slot until
wood screw
and washer
it lines up with the hanging bracket tab.
WARNING: Failure to align slot in hanging ball
safety cable
with tab in hanging bracket may result in serious
injury or death.
hanging bracket tab
hanging ball slot
Tip: Seek the help of another person to hold the
stepladder in place and to lift the fan up to you
once you are set on the ladder.
Find a secure attachment point (wood ceiling
joist highly recommended) and secure safety
motor housing
cable. It will be necessary to use a heavy duty
wood screw, washer and lock washer (not
supplied) with the safety cable loop. If necessary,
adjust the loop at the end of the safety cable. The
loop at the end of the safety cable should just fit
over the threads on the wood screw. Test safety
cable by pulling on loose end with pliers. If the
safety cable slips, the loop must be adjusted tighter.
Extra cable slack can be left in ceiling area.
page 5