Craftmade Mia Guia De Instalacion página 10

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

11. Light Kit Assembly (Optional). (cont.)
Locate screw on outer edge of switch housing plate
nearest the red dot and partially loosen this screw and
the screw directly opposite it. Remove the other 2
screws.
Connect WHITE wire from light kit fitter to WHITE wire
from switch housing. Connect BLACK wire from light kit
fitter to BLUE (or BLACK) wire from switch housing. Be
sure molex connections snap together securely.
Connect female plug from switch housing to male plug
from motor housing, matching up the colors on the
male plug with the colors on the female plug for correct
fit. Make sure plugs connect completely.
Align slotted holes in switch housing with loosened
screws in switch housing plate. Re-insert screws that
were previously removed. Securely tighten all 4 screws
with a Phillips screwdriver.
Install 2 medium base 9 watt LED bulbs (included).
Important: When replacing bulbs, please allow bulbs
and glass shade to cool down before touching.
Remove finial, finial plate, hex nut, flat washer and rubber
washer from threaded rod on light kit fitter.
Place rubber washer inside glass shade over center hole.
Raise glass shade in order to guide pull chains through
corresponding holes in glass shade. Align threaded rod
on with hole in middle of glass shade and push up
gently, allowing threaded rod to come through hole.
Replace flat washer and secure glass shade with hex nut
that was previously removed. Do NOT overtighten hex nut
as glass may crack or break.
Thread pull chains through corresponding holes in finial
plate, allowing threaded rod to come through hole in
middle of finial plate, and push up. Thread center pull
chain through hole in finial and re-attach finial. Do NOT
overtighten finial as glass may crack or break.
light
kit
fitter
male plug
female plug
light kit fitter
threaded rod
rubber
washer
flat washer
page 9
BLACK
BLUE (or BLACK)
WHITE
WHITE
connections
switch
housing
switch
housing
plate
hex nut
finial plate
finial
molex
motor
housing
switch
housing
bulb
glass
shade

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Mi52

Tabla de contenido